NDT TRAINING & CERTIFICATION COURSE– PHASED ARRAY ULTRASONIC ATESTING – LEVEL-II
To provide a basic knowledge of PAUT to enable a participant to carryout tests according to an established procedure under the supervision of a level II. The course is especially designed to provide a sound theoretical knowledge and practical skill forPA UT required for a Level II (2) technician.

A certifiedPAUT Level II (2) personnel are qualified:

• As per PCN Certification Scheme provided by The British Institute of Non Destructive Testing under British Standards.
• Capable of making Proper Scan Plan and checking the Weld Coverage Area.
• Capable to scan the Part and Detect the Defects.
• Have knowledge of the scope and limitations of PAUT
• Prepare test report for i. Accept ii. Reject iii. Rework.
• Responsible for care and maintenance of the NDT/PAUT equipment

PAUT Level-II Course Outline:

• Introduction in PAUT
• Basic Principals of PAUT
• Basic components of PAUT
• PAUT Probe Characteristics
• Types of PAUT Probes
• Beam Shaping & Steering Dynamic Depth Forms
• Digitization Principles
• Types of Scans
• PAUT machine familiarization
• Development of Scan Plan
• Data acquisition
• Data Interpretation etc.

PAUT Level-II Practical Training:

• Machine Familiarization.
• Making of Scan Plan for the Part Being Inspected.
• Implementing of Scan Plan Parameters in the Machine
• Doing Calibration.
• Drawing of TCG.
• Pre-Scan Settings
• Scanning and Recording the Data.
• Interpretation
• Reporting the Test Results.   

Training Hours:Total 120 Hours

Examination:
Specific Theory Exam      :       30 Multi Choice   -- 2 hours
Practical Exam                :       3 Plates              -- 7 hours
Written Instruction         :       Narrative           -- 2 hours
Interpretation                :       Narrative           -- 6 hours