NDT TRAINING & CERTIFICATION COURSE– PHASED ARRAY ULTRASONIC TESTING – LEVEL-II
To provide a basic knowledge of PAUT to enable a participant to carryout tests according to an established procedure under the supervision of a level II. The course is especially designed to provide a sound theoretical knowledge and practical skill forPA UT required for a Level II (2) technician.
A certified UT Level II (2) personnel are qualified to:
- As per SNT-TC 1A 2011 Edition is the Recommended Practice for NDT Level II Personnel.
- Capable of making Proper Scan Plan and checking the Weld Coverage Area.
- Capable to scan the Part and Detect the Defects.
- Have knowledge of the scope and limitations of PAUT
- Prepare test report for i. Accept ii. Reject iii. Rework.
- Responsible for care and maintenance of the NDT/PAUT equipment
PAUT Level-II Course Outline:
- Scan Plan for the Weld Geometry by ES-BEAM TOOL-4 Software
- Basic PAUT Machine Setup
- Machine Calibrations
- Drawing of TCG ( Time Corrected Gain )
- Pre-Scan Settings of the Machine
- Scanning & Recording the Data
- Interpretation by using TOMOVIEW / UT STUDIO Software.
- Reporting the Results
- Code Compliant
- Do A High Speed Scanning of Welds
- Scan Welds, Irregular Components with Single Scan
- Creates a Permanent Digital Copy of Inspection Data
- Can be used in lieu of Radiography, Eliminating Radiations Hazards
- Ability to Immediately Furnish Location & Size of the Flaws with Pinpoint Accuracy
PAUT Level-II Practical Training:
- Machine Familiarization.
- Making of Scan Plan for the Part Being Inspected.
- Implementing of Scan Plan Parameters in the Machine
- Doing Calibration.
- Drawing of TCG.
- Pre-Scan Settings
- Scanning and Recording the Data.
- Interpretation
- Reporting the Test Results.
Training Hours:Total 80 Hours
Examination:
Theory Exam : 40 Multi Choice -- 01 Hour
Specification Exam : 20 Multi Choice -- 30 Mins
Practical Exam : 2 Plates -- 03 Hours
Viva : 15 Questions : --- -- 15 Mins |
